Getting to know the types of flash tanks

Flush tank is defined as a plastic or metal container that can store water and can use this water at different times to flush the toilet. do These tools are designed and manufactured in different designs and models, the selection of which depends on various factors. Flash tanks are usually built-in and some are used as surface, among which the surface is older and generally their function is done mechanically. While their built-in type has more capabilities.

In general, it can be acknowledged that the function of the flush tank is that the water stored in its metal or plastic tank is compressed as soon as it is used. When the key is pressed or the lever is pulled, it is emptied by pressure, and in this way it removes dirt and washes the toilet as easily as possible. The water storage function of this system is also such that the flush tank, which includes a cap, can prevent it from overflowing with the weight of water, and when the latch is pulled, the cap will be removed and the water will be released. Of course, until the water in the tank is empty, the float connected to the tank keeps the cap up until the water is completely removed, and after this, the cap is covered again on the water channel pipe, and in this way, water enters the tank. It is interesting to know that in the old days there was not much variety of flash tanks and the choices were very limited, but gradually, as the demand for using this device increased, different types of them entered the market in response to the needs of customers. Washing machines store water in the tank, so using them saves water consumption. On the other hand, the use of this product helps to keep the toilets clean and this reduces the risk of contracting diseases caused by the contamination of the toilets to a great extent.

In general, flush tanks can be considered among the old examples of these water storage devices, which are freely installed on the wall and available. In fact, perhaps the biggest advantage of using the surface type of these tools is that they are easy to access, and if a problem occurs, it can be easily repaired and replaced. Also, in using this type of flash tanks, placing their weight inside the wall is very important, so you can choose large sizes for the tank of these systems without worry. On the other hand, it should be noted that built-in models are very suitable for small spaces where we don't want to dedicate a large part to this device, and they practically do not occupy any space, but if there is a problem with their operation, repairing and replacing the flash tank is a difficult and costly task. It will be Barry. It can also be acknowledged that high noise, occupying space, inappropriate appearance and smaller sizes are the defects of this model. They are the most familiar and in many cases, the best flash tanks on the market, which can be easily found in any market. This model of flush tanks occupy a little space in the bathroom and produce more noise when in use, but the availability of flush tanks makes it possible to easily repair or even replace them if they find a problem. Also, surface models have a lower price than built-in models, so if you are looking for a cheap flash tank, this model of flash tanks can be an economical option to buy in addition to meeting your needs.

These types of tanks are known as the simplest and oldest models that have a button to drain the water. This button works mechanically and by pressing it or pulling it, all the water in the tank is removed.

Two-time flush tanks are known by this name because they allow the water in the tank to be drained at two different times. In fact, a person can drain part of the water in one step and, if needed, another part in the second step.

In general, it can be acknowledged that the second tank model has almost the same performance as the two-stroke models, with the difference that this equipment has two separate tanks with two There are separate entrances and two separate exits. Usually, the primary tank is smaller, which is dedicated to draining part of the water. Also, if needed, the user can also empty the contents of the second tank. It should be noted that two-tank models are very suitable for saving water consumption. It is said that by using this product, you can save 50 to 70% in water consumption.

These equipments are the same as normal flash tanks and their performance is also similar; But their difference is due to the use of antibacterial substances in these equipments, which prevent the growth of bacteria and pollution in the environment. In addition to the increase in environmental health, this issue is also related to the increase in price compared to all types of normal models.

This type of flash tanks work automatically as its name suggests and there is no need to press a button. These flush tanks automatically drain their tank water after the person leaves or the toilet door is opened. The use of these models is very hygienic because it does not require the intervention of hands. Automatic types are very suitable for public places because they prevent the spread of various diseases.